Why Are Microphones Covered With Fur?
There are reasons for which you should cover your microphones with fur.
After all, the quality of your outdoor recording depends on this.
Outdoor recording can be challenging, especially when in a windy location.
So, what’s the best way to deal with this?
When it’s windy, your microphone tends to have double tasks to play. i.e taking both the intended sound waves and noise caused by the wind.
To prevent the quality of your audio recording from being compromised, you need a windshield.
Windshields for noise attenuation come in various forms.
However, the most suitable one for outdoor recording is known as a Dead Cat.
It’s covered with fur all over.
Thus, it’s from this appearance that it borrows the name of a Dead Cat.
Also, the role of the fur is to reduce the effect of wind noise that would affect sound quality through pops and unwanted thumbs.
Here, you’ll discover what microphone furs are, how wind affects audio quality and tips on how to prevent this.
So, keep reading!
Types of Microphone Fur
Fury covering for microphones can be categorized into two-- the Dead cat and the Dead kitten.
The two play a similar role in noise attenuation.
Nevertheless, there is some slight difference.
A dead cat is a removable furry sock that you use to cover your microphone’s windscreen.
By doing so, you reduce the impact of wind noise that is likely to affect your recording quality.
Unlike Dead cats, Dead kittens are smaller in size, but play the same role as a Dead kitten.
Popularly, this type is known as windjammers. Moreover, by adding a layer of fur on the microphone, Dead kittens contribute to noise protection.
Related: Here is a page showing you everything about Microphones
Effects of Wind on Microphone Signal
The outdoor recording comes with its challenges.
At the center of this is wind.
Not only do you risk wind blowing your stuff away, but also affecting the quality of your sound recording.
Wind can affect your microphone in two ways.
For one, when the sudden violent movement of wind gets into contact with the microphone’s diaphragm, a sharp signal is created which in turn leads to an irritating high pitch.
Microphone diaphragms balance the internal and external pressure of the microphone.
However, when violent airwaves suddenly get into the diaphragm, internal pressure goes off balance.
It’s this that leads to the sharp sound which can be translated as noise.
Secondly, when the wind hits the surface of the microphone, it produces an unwanted sound that is seen as noise.
Unfortunately, when this happens and there is nothing to shield the wind, definitely, your microphone will record the noise.
Thus, for these two reasons, you need to have a material covering your microphones to prevent the adverse effects of wind impacts.
At best, you need a furry absorbent that takes in the impact of the wind instead of the microphone.
Qualities of The Best Microphone Fur
It’s clear that you already know what you want-- to record high-quality audio outdoor.
However, for this to be successful, you need to have the right equipment.
Most importantly, the wind shielding equipment needs to be of the right quality.
Thickness: The perfect furry covering should be of the right thickness.
What this implies is that it should be neither too thick nor too thin, but somewhere in the middle.
Too thick fur muffles sound by affecting the transmission of vital frequencies.
On the flip side, too thin fur allows every sample of frequency-- low and high quality-- into the microphone.
With a minimal to zero noise filtration, your microphone has a high probability of receiving low-quality frequencies that have a negative effect on audio quality.
Flexibility: The best furry covering should not be rigid but flexible to accommodate other wind noise protectors.
Therefore, you need a Dead cat that you can dress on top of your wind foam for ultimate wind noise protection.
This is also advantageous, suppose you are on a budget but still you want quality outdoor recording.
Being that most microphones come with a wind foam, you can get an aftermarket microphone fur to make it more effective.
Review of The Best Microphone Furs
There are multiple Dead Cats in the market.
However, the process of choosing one that suits your needs can be tough.
But you don’t need to worry.
Here’s the review of what should be the best Dead Cat covering for your microphones.
Movo WS-G7 offers the best microphone covering and protection from wind. The pack includes a foam covering and the dead cat furry covering.
The good thing about this is that you can use the foam covering for indoor recording and the Dead Cat outdoors.
Besides, the foam covering reduces the impact of surrounding noise up to 8 dB.
This makes the foam covering ideal for recording tutorials indoors.
On the flip side, the furry covering reduces outdoor ambient noise up to 40 dB.
Therefore, this makes it suitable for vlogs and travel recordings.
With this package, you can make your recordings anywhere-- both outdoors and indoors-- without worrying about the ongoing weather conditions.
Moreover, you get a one-year product warranty and 24hrs customer support.
Tips to Remember
To enjoy the full benefits of your furry microphone covering, you need to take some caution.
Here’s exactly what you should do.
Clean the furry covering every so often.
Frequently brush the fur to keep them in good shape.
Keep it dry by removing any moisture logged into the furs after use in a humid setup.
Outdoor recordings come with multiple challenges.
One key challenge that you will face is wind noise caused by windy situations.
However, the quality of your audios should remain top-notch.
Unfortunately, it’s not possible with the wind in the equation.
For this reason, you need to cover your microphone with fur.
The industry name for this is a Dead Cat as it literally looks like one.
Moreover, the furry covering works by mitigating ambient noise while making your recording.
Also, you need to take good care of your furry covering so that it continues to serve you well.
Therefore, remember to keep it clean, brush it often and keep it dry all the time.
Furry covering for your microphones is so essential for quality audio, thus, you will find Movo WS-G7 the ultimate microphone fur.